湘中量具刃具有限公司（簡稱：湘量公司）下設湘中刃具有限責任公司和湘中量具有限責任公司，是湖南省*，是中國量具行業Z早的生產廠家之一。*以來一直是國家工量具的重點生產企業和出口基地企業。經過近五十年的發展，現為*較大的卡尺和光柵尺代工企業。
公司技術*，實力雄厚，具有較強的自主開發、設計和生產能力。現有職工近千人，擁有*的加工和檢測設備近千臺。主要產品技術水平*保持國內*地位，湘中的卡尺和光柵尺品種Z多、規格Z為齊全，質量*。產銷量居世界*。除卡尺和光柵尺外，公司還生產千分尺、量表、量儀等產品。
正如公司商標QLR，“質量—Q、生命—L、信譽—R”是我們不懈的追求，我們始終將質量與信譽視作生命。我公司建立了嚴格的質量保證體系和 可靠的質量管理制度，于1996年通過了ISO9001質量體系認證，并于2004年通過ISO9001:2000版的認證。公司所有產品均嚴格按照ISO及DIN標準制造 ，質量穩定，精度可靠。
公司一貫奉行“顧客*”的經營方針，竭誠為顧客服務，不斷滿足客戶的各種需求。公司期待著繼續獲得您和廣大客戶的合作與支持。非常感謝您對我們公司和產品的信賴和支持。
"此網站所屬湖南湘中量具有限公司新化售后服務部"
Newall:"*品牌代理"
1968年，Newall于英國Peterborough成立。Newall一直致力于為機械及自動化等領域提供定位準確的高可靠產品。
1973年Newall發明了其的“Spherosyn”球柵測量技術，球柵使得嚴苛環境下的測量亦可實現精準可靠。
Newall數顯系統應用廣泛，幫助客戶實現了生產力和制造效率的提高。引入了較早科技的較早一代Newall數顯表，功能更加豐富，可靠性亦得到進一步提高。
Newall公司研發團隊在伴隨著客戶成長的過程中，持續地進行設計創新和功能優化，并不斷引入新技術以豐富產品線，竭誠為客戶提供優質可靠的高科技產品。
作為球柵傳感器和數顯系統的制造商，Newall擁有三十余年的經驗，其產品在享有盛譽。85%的Newall產品用于出口，1998年Newall榮獲女王出口獎。
Newall公司化的分銷及服務網絡遍及63個國家，訓練有素的銷售、服務人員以及分布各地的辦事機構能為您提供專業及時的服務。
Newall公司在英國本土的生產基地，通過了英標ISO 9001：2000質量認證。
光柵尺，電子尺，光學尺，光柵傳感器，球柵尺，球柵表，球柵顯示器，球柵計數器，尼康測量投影儀，新天輪廓投影儀，OGP光學投影儀，萬濠影像測量儀，智泰二次元，三豐工具顯微鏡，新天萬能工具顯微鏡，新天測長儀JD9，測長儀JD8
- 維修售后NEWALL-DPG2000球柵數顯表（顯示器、計數器）在本資料上方（或技術資料中）能下載帶圖的詳細說明書
- 維修及銷售的主要有日本富特巴(FUTEBA)、三豐（Mitutoyo）、英國新和(NEWALL)、萬濠(RATional)、怡信(Easson)、信和（Sino）、奧特嘉(oska)、朕衡(Zhen)、碩信(Soin)、必嘉(Bica)、艾莫特(AMOT)、意大利(Givi)等品牌.維修數顯表范圍：NEWALL球柵數顯表維修DP8、E70、B60、Mitutoyo三豐品牌（KACOUNTER、QM-DATA200、KLD-200、EC-100），Rational萬濠（WE6800-2、WE6800-3、WE6800E、DC3000），RSF-ELEKTRONIK，FAGOR（20I-M、30I-M），NEWALL新和（B60、E70、DP8），BICA-DRO，POWERN（PE2X、PE3X），HEIDENHAIN海德漢（ND780、ND522、ND523），NIKON尼康（DP-E1、SC2-E1、SC3-E1、QUADRA-CHEK200），CHFOIC（DRO-2M、DRO-3M、DRO-2L、DRO-2G、DRO-3E、JDS100B、DS401SM），SONY索尼（LH51、LH71、LH52、LH72），JENIX韓國東山，SUMTAK-FUTABA（FUTABA-PULSCALE、CMJ200），SINO諾信（SDS6-3V、SDS6-2V、SDS2MS），GSW-3A、GSW-3B、GSW-204、GSW-2B、GSW-2C，SOIN（SI2008-2B、SI2008-3B）
- 維修售后NEWALL-DPG2000球柵數顯表（顯示器、計數器）
- 以上品牌和型號的數顯表都能維修：數顯表被雷擊壞、接錯電壓被燒壞、數顯表顯示軸跳數，顯示軸不顯示、顯示軸精度不準、顯示軸閃爍、數顯表按鍵不靈、數顯表無信號等等。
- 維修售后NEWALL-（顯示器、計數器）
-
----------------------- Page 1-----------------------
Newall Measurement Systems
DPG2000
DIGITAL READOUT
SYSTEM
INSTALLATION/USER
MANUAL
----------------------- Page 2-----------------------Contents
CONTENTS
1. INTRODUCTION
1.1 EMC and Low Voltage Compliance
1.2 Technical Specifications
2. INSTALLATION
2.1 Mounting
2.2 Power Supply
2.3 Transducer Connections
2.4 Switching On
3. SET-UP
3.1 Sleep/Datahold
3.2 Input Type
3.3 Direction
3.4 Radius/Diameter
3.5 Linear Error Compensation
3.5.1 Calculating Linear Error Compensation
4. USER INSTRUCTIONS
4.1 Using the Keypad
5. OPERATING FUNCTIONS
5.1 Using Incremental
5.2 Using Absolute
5.3 The Digifind Function
5.4 Inch/Millimeter Conversions
5.5 Center Find
5.6 Datahold Function
5.7 Selecting An Axis Resolution
6. TROUBLESHOOTING
7. CLEANING
1 Newall Measurement Systems
----------------------- Page 3-----------------------Introduction
1.0 INTRODUCTION
1.1 EMC and Low Voltage Compliance
The DPG2000 Digital Readout conforms to the relevant European standards for electromagnetic compatibility
and low voltage directive as detailed below.
ISO 9001
BS EN 50081-2: Electromagnetic compatibility.
Generic Emission Standard - Industrial Environment
BS EN 50082-2: Electromagnetic compatibility.
Generic Immunity Standard - Industrial Environment. Certificate No FM36096
BS EN 61010-1: Safety requirements for electrical equipment for
measurement, control and laboratory use.
1.2 Technical Specifications
Dimensions:
Height: 140mm (5.5in)
Width: 240mm (9.5in)
Depth: 80mm (3.2in)
Weight: 2.5kg (5.5lbs)
Operating Voltage: 115 or 230V (switch selection)
Supply Voltage Fluctuation: Not to exceed +/-15% of the operating voltage
Supply Frequency: 50 to 60 Hz
Maximum Power Consumption: 18VA
Operating Temperature: 0 to 45°C
Storage Temperature: -20 to 70°C
Transducer Inputs: Dependant on model, one, two or three Spherosyn/Microsyn transducers
Selectable Resolutions:
Spherosyn/Microsyn 10 5μm (0.0002in) / 10μm (0.0005in) / 20μm (0.001in) / 50μm (0.002in)
Microsyn 5 1μm (0.00005in) / 2μm(0.0001in) / 5μm (0.0002in) / 10μm (0.0005in)
Environmental Conditions: Indoor Use, IP20 (IEC 529)
Relative humidity - maximum 80% for temperatures up to 31°C decreasing
linearly to 33% at 45°C
Transient overvoltage according to INSTALLATION CATEGORY II of IEC664
POLLUTION DEGREE 2 in accordance with IEC664
Newall Measurement Systems reserves the right to change specifications without notice.
Newall Measurement Systems 2
----------------------- Page 4-----------------------Installation
2.0 INSTALLATION
2.1 Mounting
The DPG2000 is supplied with a fixing kit consisting of a M10 stud, nut and washers. Figure 1.1 shows the
use of this kit in conjunction with an optional mounting arm (Part No: 294-35670).
Be sure that the mounting arrangements are secure as the operator will need to apply pressure to the front
panel when using the keypad.
An optional mounting assembly (Part no: 294-37740) is available which allows for tilt and rotation of the
cabinet.
Select the location of the DPG2000 with due regard to safety and ease of operation. Keep clear of moving
parts and coolant spray. Ensure that the natural ventilation around the cabinet is not restricted.
To ensure correct operation of the DPG2000, it is recommended that the case is grounded to the machine.
Use a wire or strap of a least 1.5mm2 (16 AWG) from the cabinet equipotential terminal, (Figure 1.2), to a
suitable point on the machine body. The wire should be as short as possible. The machine must also be
properly grounded to a good earth point.
Mounting Arm
Figure 1.1 Standard Fixing with Optional Mounting Arm
2.2 Power Supply
BEFORE CONNECTING THE ELECTRICAL SUPPLY TO THE CABINET, CHECK THAT THE VOLTAGE
SELECTOR SWITCH IS CORRECTLY SET. Figure 1.2 shows the position of this switch.
The mains supply is connected through a detachable supply cord. The cabinet is supplied with a cord fitted
with a right-angled connector. If another supply cord is to be used, it must have a IEC320, 10A, EARTHED
mains connector with a cord rated for at least 10A.
3 Newall Measurement Systems
----------------------- Page 5-----------------------Installation
Mains supply switch
Mains voltage selector switch
Cabinet equipotential terminal
for grounding to machine IEC inlet (mains supply)
Mains supply fuse
Not to be replaced by the operator
Disconnect mains supply before replacing
Input connectors 1,2 or 3
according to model
Figure 1.2 Connection Diagram
The PROTECTIVE EARTH CIRCUIT of the mains supply MUST BE CONNECTED to the protective earth
terminal of the cabinet through the supply cord.
The supply cord should be secured to the mounting arm or pillar with cable ties to ensure that it cannot drop
into a hazardous position when disconnected from the cabinet.
The power supply cord must be routed away from moving parts, swarf, coolant or sources of heat.
Newall Measurement Systems 4
----------------------- Page 6-----------------------Installation
If a mains plug is not already fitted to the supply cord, or is of the wrong type, then a suitable EARTHED plug
should be used which complies with the relevant specifications for plugs and socket-outlets.
The mains supply fuse is a 20x5mm, type T0.5A, 250V. It is not to be replaced by the operator. If the fuse
blows it is an indication of some significant problem with the power source. Check the supply and wiring
carefully. Before replacing the fuse, the cabinet must first be disconnected from the supply by the removal of
the IEC socket from the inlet. Do not position the equipment so that it is difficult to disconnect the mains
supply.
NOTE: If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
2.3 Transducer Connections
Figure 1.2 shows the connection sockets at the back of the DPG2000. The DPG2000 is designed for use
with Newall’s Spherosyn and Microsyn transducers only. The transducers are connected to the DPG2000
with Bleecon type connectors. These connectors have a sliding sleeve that locks the connectors into their
sockets.
Switch off the DPG2000 before connecting, or disconnecting the transducers. To fit the connectors into the
appropriate socket at the back of the cabinet, first align the connector and then push firmly in place. You
should hear a click confirming that the locking sleeve has engaged. To remove the connector, pull back on
the connector sleeve to disengage the locking mechanism.
The transducers and digital readouts are connected at a separated extra low voltage (SELV) level. Any
additional interconnections must also be at SELV level.
2.4 Switching On
The mains supply switch for the DPG2000 is mounted on the back of the cabinet as shown in Figure 1.2.
When you switch on the DPG2000 the cabinet will automatically go through a brief self diagnostic routine.
During this routine, the name DPG2000 will be shown, then the software version number will be displayed
and finally, all segments of the displays will be lit.
After this routine, the DPG2000 is ready for use.
CONVENTIONS USED IN THIS MANUAL
The direction of travel of an axis refers to the travel of the tool relative to the
workpiece. Keys on the keypad are signified in bold print,
such as [ ent ] for the enter key.
5 Newall Measurement Systems
----------------------- Page 7-----------------------Set-Up
3.0 SET-UP
The Set-Up procedure allows you to change the main settings for the DPG2000. For normal use, you will
find that you only need to perform the Set-Up procedure once, and it is possible that the factory defaults are
suitable for your needs without change. (See Table 1)
The Set-Up procedure can only be activated just after power
is switched on to the cabinet. After switching on, press the Default Setting DPG2000
concealed key which is located under the "ne" of the newall
Sleep On
logo on the keypad (See Figure 1.3). The key must be
pressed before the end of the initial self diagnostic Input Type Spherosyn
routine. Resolution 5μm
Direction 1
When you have entered the Set-Up routine, the letters
‘SET-UP’ appear in the display. Radius/Diameter Rad
Linear Compensation 0
The Set-Up procedure makes use of a menu system. The
main menu consists of a list of options that can be cus- Table 1 - Default Settings
tomised for your use (See Table 2). You simply press the
∧∧ ∨∨
[ ] [ ] keys to scroll through this list until you reach the
option you wish to change. To change the option when
selected, press the [ Xo ] [ Yo ] or [ Zo ] key. On the single
axis version, the options can be changed by pressing the
blue [ 0 ] key.
To exit the Set-Up routine press the concealed key ("ne" of newall).
CONCEALED KEY
FOR ENTERING
SET-UP ROUTINE
Figure 1.3 DPG2000 keypad
Newall Measurement Systems 6
----------------------- Page 8-----------------------Set-Up
SLEEP
ON
OFF
INPUT TYPE
SPHEROSYN
MICROSYN 5
MICROSYN 10
DIRECTION
0
1
READINGS
RADIUS
DIAMETER
LINEAR ERROR COMPENSATION
USER DEFINABLE
Table 2 - Set-Up Menu Options
3.1 Sleep/Datahold
In the Set-Up routine, press the [ ∧ ] key until "SLP ON" or "SLP OFF" is displayed. Toggle between
"SLP ON" or "SLP OFF" by pressing the [ Yo ] key.
Select "SLP ON" if you want to be able to use the Datahold facility. (See Section 5.6 for a description of
Datahold). Otherwise select "SLP OFF".
When the selection is made press [ ∧ ] to continue to the next option.
3.2 Input Type
Select between Spherosyn, Microsyn 5 or Microsyn 10 for each axis.
Pressing [ Xo ] [ Yo ] or [ Zo ] moves between transducer types for that axis. Pressing [ ent ] defines
that axis to be the selected type.
Warning: The axis selected for the input type must match the actual transducer (Spherosyn
or Microsyn) which is plugged into the corresponding axis. Erroneous readings
will occur if this warning is not followed.
When the selection is made press [ ∧ ] to continue to the next option.
7 Newall Measurement Systems
----------------------- Page 9-----------------------Set-Up
3.3 Direction
The direction option allows you to change the direction of travel of each axis. For example, if after installation
the X axis is measuring positive from right to left, you can use this option to change the direction of the X
axis so it measures positive from left to right.
In the Set-Up routine, press the [ ∧ ] until "DIR" (direction) is displayed.
Each axis display will show "0" or "1"
Pressing each axis key [ Xo ] [ Yo ] or [ Zo ] reverses the counting direction. When the unit is displaying
the choices you wish to use, press [ ∧ ] to continue to next option.
3.4 Radius/Diameter
This option allows you to select any axis to display measurements at a two times (x2) factor. This is used on
lathes and other turning applications to display part diameter rather than part radius.
In the Set-Up routine, press the [ ∧ ] key until "RAD" or "DIA" is displayed.
Pressing each axis key [ Xo ], [ Yo ] or [ Zo ], switches between radius and diameter readings for that axis.
When the unit is displaying the choices you wish to use, press [ ∧ ] to continue to the next option.
3.5 Linear Error Compensation
This option allows you to apply a constant correction factor to all measurements displayed. This factor is
expressed in parts per million (PPM).
In the Set-Up routine, press the [ ∧ ] key until LC (Linear Compensation) is displayed. The display will show
"LC 0" or the last correction factor entered.
To insert, or change, a correction factor, select the axis [ Xo ] [ Yo ] or [ Zo ] and enter the factor you wish to
use.
The value is entered by pressing the [ ∧ ] and [ ∨ ] keys.
For example, to apply a factor of 200PPM to the X axis, press the following keys: [ X ] [ ∧ ] until the displays
show 200 then press [ ent ].
If you make a mistake you can revert to the previous settings by pressing the [ ce ] key. This cancel
function will not work after the [ ent ] key has been pressed.
If the unit is displaying measurements less than the actual measurement, enter a positive factor to
compensate. A factor of 200PPM means displays are measurement x 1.000200. When each axis is
displaying the correction factor you wish to use, press [ ∧ ] to return to the first option.
3.5.1 Calculating Linear Error Compensation
To establish a correction factor, check the measurements displayed by the DPG2000 against a known
distance. The correction factor should be established while in the standard operating mode and not in the
Set-Up routine.
Newall Measurement Systems 8
----------------------- Page 10-----------------------Set-Up/User Instructions
For example, you might use a known (actual) distance of 500mm, against which the DPG2000 displays
499.8mm. The correction factor you would then apply is:
(0.2mm/500mm) x 1,000,000 = 400PPM
If the DPG2000 displays 500.2mm over the same distance, the correction factor would be:
(-0.2mm/500mm) x 1,000,000 = -400PPM
Warning: Once you have entered a multiplication factor for an axis, all measurements will be
adjusted accordingly. If you wish to disable this adjustment, you will have to enter a
compensation factor of zero.
You can re-edit any Set-Up function by locating it using the [ ∧ ] and [ ∨ ] direction keys.
To leave the Set-Up routine press the concealed key, which is located under "ne" of the newall logo.
4.0 USER INSTRUCTIONS
4.1 Using the keypad
Figure 1.3 shows the layout of the keypad. The keys are used as follows:
Key Purpose
Xo Yo Zo Set the current position for the axis to zero (reset)
ce Clear entry
ent Enter key to confirm data entry
abs Switches between absolute and incremental readings
inc
(LED indicates choice of mode)
1 2 Centre Find function
ref0 Select the Digifind function
res Setting Axes Resolutions
in Switches between inch and millimetre display
mm (LED indicates choice of mode)
∧ Scroll Up
∨ Scroll Down
9 Newall Measurement Systems
----------------------- Page 11-----------------------Operating Functions
5.0 OPERATING FUNCTIONS
5.1 Using Incremental
(a) Purpose and use
When the DPG2000 is set to incremental mode, it can be
used to display each new position relative to the last position.
This is also known as point-to-point operation. 30 70 40 50
On setting to incremental, you can reset each axis by
pressing [ Xo ] [ Yo ] or [ Zo ].
Each time you switch to incremental mode, the DPG2000 will display the position relative to the last reset
position while in the incremental mode.
(b) Keystrokes
Operator Steps Keystrokes Axes Display
Set to incremental mode abs
inc
Reset axes Xo 0.000
Yo 0.000
Zo 0.000
5.2 Using Absolute
(a) Purpose and use
When the DPG2000 is set to absolute mode it will display the
position relative to an established datum point.
30
(b) Keystrokes 100
140
190
Operator steps Keystrokes Axes Display
abs
Set absolute mode
inc
Newall Measurement Systems 10
----------------------- Page 12-----------------------Operating Functions
(c) Establishing the datum
When you reset the display in absolute mode, you are setting the current position of your machine as your
datum point. All absolute positions will be measured relative to this datum.
To set the datum position, move the machine to the point you intend to establish as the datum and then
reset any, or all, axes while in the absolute mode.
Operator steps Keystrokes Axes Display
abs
Set to absolute mode inc
Move machine to the
datum location
Reset axes
Xo 0.000
Yo 0.000
Zo 0.000
5.3 Digifind
Digifind is a reference function used to find the datum should it be lost due to power failure or an accidental
key stroke.
(a) Using Digifind to re-establish a lost datum
In the event that the datum positions are lost, align each axis to within ±6mm (±0.25”) for Spherosyn or
±2.5mm(±0.098”) for Microsyn to the original datum point.
By pressing the [ refo ] followed by the corresponding axis key, the display will update to a distance equal to
the distance from the current position to the datum point.
Each time the DPG2000 is powered up the cabinet will automatically use Digifind to compensate for any axis
movement of up to ±6mm (±0.25”) for Spherosyn and ±2.5mm(±0.098”) for Microsyn.
5.4 Inch/Millimetre
To change between inch and millimetre readings, press [ in/mm ]. The displayed data will be converted
instantly. The LED beside the key reminds you which mode is being used.
When you switch on the DPG2000, it will display the same unit of measurement which was set prior to
power loss.
11 Newall Measurement Systems
----------------------- Page 13-----------------------Operating Functions
5.5 Centre Find
Centre Find halves the dimension displayed for any or all axes selected. You can use Centre Find in either
absolute or incremental mode. The keystrokes are the same in either case.
In the following example, Centre Find is being used on the X axis to find the centre point of a workpiece that
is 100mm wide.
Operator steps Keystrokes Axes Display
Locate to your first position
(One edge of your workpiece) Xo 0.000
and zero the axis
Locate to the second position 100.000
(The other edge of the workpiece)
Use Centre Find to locate the 1 2 Xo
50.000
centre point
In either absolute mode or incremental mode, once you have used Centre Find you can locate the centre
point by moving until the display is at zero.
If you are in absolute mode, remember that using Centre Find will set the datum to the centre point.
5.6 Datahold (Sleep)
Datahold allows you to disable the DPG2000 but retain power to the measurement transducers and the
memory circuits. You can use Datahold to prevent unauthorised or accidental use of the DPG2000 whilst
unattended.
To select Datahold, press the concealed key located under the "ne" of the "newall" logo (See Figure 1.3).
While the DPG2000 has been set to Datahold, the keypad will not function and the displays will be blank.
If the machine axis is moved, "DISPLACD" (displaced) will appear in the display window. The DPG2000 will
record all transducer movement and will update the display once Datahold is cancelled. If a key is pressed,
"TOUCHED" (touched) will appear in the display to alert the operator that data entry has been attempted.
To cancel datahold, press the concealed key located under the "ne" of the "newall" logo.
5.7 Selecting An Axis Resolution
The resolution to which an axis position is displayed, can be selected by pressing the [ res ] key. This will
display the current selection for all axes.
To alter an axis resolution select that axis by pressing either [ Xo ] [ Yo ] or [ Zo ]. The resolution can then
be changed by pressing the [ ∧∧ ] and [ ∨∨ ] keys. Once the desired resolution is displayed press [ ent ].
If you make a mistake you can revert to the previous settings by pressing the [ ce ] key.
Newall Measurement Systems 12
----------------------- Page 14-----------------------Operating Functions
The available resolution options depend on the transducer type selected in Set-Up. See Sections 1.2 and
3.2
Operator steps Keystrokes Axes Display
To enter resolution mode
res 0.005
0.005
0.005
To select the axis Xo 0.005
Scroll through resolution options ∧ ∨
To confirm your selection ent
You can use the resolution function in either inch or millimetre mode. The keystrokes are the same in either
case. The resolutions will be displayed in units corresponding to the selected mode.
13 Newall Measurement Systems
----------------------- Page 15-----------------------Troubleshooting/Cleaning
6.0 TROUBLESHOOTING
Symptom Solutions
1 Nothing happens when the Check that the DPG2000 is correctly connected to a working power
unit is switched on. source.
Check the power lead is not damaged.
Check the selector switch on the DPG2000 is set to accept the
correct power supply voltage.
Check the fuse. Note that if the fuse has blown, this suggests a fault
with the power source which must be corrected before the fuse is
replaced. (See Section 2.2)
2 When the unit is switched on This suggests that voltage of the power is to low.
the displays are frozen.
Check that the power source is within the limits accepted by the unit.
(See Section 2.2)
3 The displays work, but reset This suggests either that the voltage of the power source is too low,
from time to time without the or that the power source has an intermittent fault.
keys being pressed.
Check the power source as above.
Check that all connections are sound.
4 The displays work, but give This suggests that the there is a poor earth (ground) connection.
erratic readings, the last digit Both the DPG2000 itself, and the machine on which it is installed,
jitters or the measurements jump must have proper earth (ground) connections. (See Section 2.1)
to new Figures unexpectedly.
5 "NO SIG" or “SIG FAIL” appears in This means that the DPG2000 is not receiving a proper signal from
the display. the measurement transducer.
Check that the transducer connection is good.
Check that there is no damage to the connectors or to the transducer
lead. If only one axis is displaying this message, turn off the DPG2000
and connect the transducer from a working axis into the faulty axis.
Turn the DPG2000 back on, if the same message appears, the fault is
likely to be in the DPG2000 and you should contact your local dealer.
7.0 CLEANING
Disconnect the cabinet from the power supply before cleaning.
It is recommended that the cabinet be wiped over with a lint-free cloth with a non corrosive/abrasive cleaning fluid.
Do not use compressed air.
Newall Measurement Systems 14
采購中心
化工儀器網