您好, 歡迎來到化工儀器網
| 產地類別 | 國產 | 價格區間 | 面議 |
|---|---|---|---|
| 儀器種類 | 管式爐 | 應用領域 | 醫療衛生,環保,食品,化工 |
產品簡介
詳細介紹
三溫區回轉爐主要特點Main features:
1) The item is suitable for powder materials.
該設備適用于粉末材料
2)310S high temp.-resistant S.S. tube put in the middle of furnace, one end sealed by magnetic fluid, the other end uses clamp-joint rotating seal elements, in order to move materials in and out easier, also monitor the pressure inside tube.
310S耐高溫不銹鋼爐管放置于爐體中間，爐管一端采用磁流體密封，爐管另一端采用卡箍連接旋轉密封組件，方便物料出入及管內氣壓監測。
2) When tube rotating, powder materials can be evenly stirred, not piled up, moreover, when powder discharging, completely auto-discharging in one way, no remains at all.
爐管旋轉過程中粉料能均勻攪拌不堆積，出料的過程中也能一個方向*自動出料，沒有滯留。
3)Widely used to calcine and dry for battery material, non-strong alkali powder material ,granular material
廣泛應用于電池正負極材料，無強酸堿性粉體材料，顆粒狀物料。
4)can supply vacuum or gas protection experiment environment.
可在真空下或氣氛保護下進行燒制
三溫區回轉爐技術參數Technical Parameters：
Power 輸入電源 | Power rated: 28KW (208-240V) 額定功率：28KW (208-240V) | ||||
Voltage 電壓 | Voltage rated: AC208-240V 50/60HZ 額定電壓： AC208-240V 50/60HZ | ||||
Working Temperature 工作溫度 | Max. Temperature: 800℃(310S S.S. tube), 1100℃ (high-purity quartz tube) 最高溫度：800℃(310S不銹鋼管), 1100℃ (高純石英管) Continuous working temperature: 700℃ 持續工作溫度：700℃ Heating Rate: 10℃/min 升溫速率：10℃/分 | ||||
控溫方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定調節 30 programmable segments for precise thermal processing. 智能化30段可編程控制 Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 | ||||
Length of heating zone 加熱區長度 | 900mm | ||||
Length of constant zone 恒溫區長度 | 500mm | ||||
Heating Elements 加熱元件 | Resistance wire, Fe-Cr-Al Alloy doped by Mo 電阻絲（摻鉬鐵鉻鋁合金） | ||||
Temperature Accuracy 控溫精度 | +/- 1℃ | ||||
Dimensions 尺寸 | Tube size: S.S.310S Shaped tube, 2*Φ50*400 (two ends) +φ270*860 (middle) mm 爐管尺寸：不銹鋼310S異形爐管2*Φ50*400（兩端）+φ270*860（中間）mm Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating). 兩個氧化鋁管堵阻擋管中心產生的熱輻射（氧化鋁管堵必須在加熱前塞進爐膛） | ||||
Inclinable angle 可傾斜角度 | 30 degree (adjustable) 30度(可調) | ||||
Rotate rate 爐管轉速 | 6-50 round/min (adjustable) 6-50轉/分(可調) | ||||
Net Weight 凈重 | 90kg | ||||
密封 | one end sealed by magnetic fluid, 一端采用磁流體密封 The other end uses clamp-joint rotating seal elements 另一端采用卡箍連接旋轉密封
| ||||
Vacuum Pressure 真空壓力 | 1pa can be achieved by mechanical pump 機械泵可達1pa 10^-4 pa can be reached by molecular pump 分子泵可達10^-4pa Please click the picture below to order vacuum parts 點擊下列圖片訂購真空部件
| ||||
Warranty 質保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） | ||||
Warning 注意事項 | Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 | ||||
Compliance 認證 | CE Certified CE認證 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付費進行TUV(UL61010)或CSA認證 | ||||
Operation instructions 操作指導 |
Click to download the operating manual 點擊下載說明書 |
其他推薦產品
更多產品-
面議
-
面議
-
面議