a级国产片免费观看,欧美大片免费观看,av区无码字

The B+K Precision model 520C Transistor Tester is designed for in circuit and out of circuit transistor testing with special features for making additional tests on devices out of circuit. The instrument is designed for a minimum amount of control manipulation, making for rapid testing of most devices.

-Determines good or bad transistors, FET's, SCR's, or diodes.

-Patented limited energy pulse circuit permits in circuit testing in the presence of low shunt impedance's with complete safety for the device under test.

-Easy to operate panel eliminates the need to refer to a reference or operating manual only three switches, no panel adjustments.

-Six position test switch makes it unnecessary to know the device terminal identification.

-A logarithmically scaled meter identifies leakage in both Silicon and Germanium devices.

-Front Panel socket for out of circuit transistor testing

技術(shù)參數(shù)：

	520C	510A
IN-CIRCUIT TEST
GOOD/BAD TEST	PNP and NPN transistors FET’s, SCR’s
IDENTIFIES	NPN or PNP FET as N-channel or P-channel Silicone or germanium transistors transistors in LO drive, base lead in HI drive all leads of SCR	NPN or PNP FET as N-channel or P-channel FET-gate lead, all leads of
OUT-OF-CIRCUIT TEST
GOOD/BAD TEST	PNP and NPN transistors FET’s, SCR’s	PNP and NPN transistors FET’s
IDENTIFIES	NPN or PNP FET as N-channel or P-channel Silicone or germanium transistors	NPN or PNP FET as N-channel or P-channel
MEASURES	Reverse leakage from 0.1mA to 9mA	Does not apply
AUTOMATIC INDICATORS
AUDIBLE TONE	GOOD	Does not apply
LED	NPN or PNP, Ge or Si	NPN or PNP, Ge or Si
TEST SWITCH	Base or Gate for good transist or FET’s	Base or Gate for good transistor or FET’s
METER SCALES	Readable from 0.1μA to 9mA for Ice leakage, calibrated for silicon and germanium power and signal transistor leakage limits	Does not apply
APPLIED TEST CURRENTS
BASE DRIVE*	250mA （HI）, 1mA （LO）
COLLECTOR*	125mA
TEST REPETITION	10Hz	5Hz
IN-CIRCUIT SHUNT LIMIT FOR VALID GOOD/BAD TEST
RESISTANCE	>10Ω （HI）, 1.5kΩ （LO）
CAPACITANCE	<15mF （HI）, 0.3mF （LO）	<25mF （HI）, 0.3μF （LO）
GENERAL
POWER REQUIREMENT	9V Battery （Supplied） or optional AC adaptor	6VDC from 4 “AA” batteries（not supplied）
OPERATING TEMP	32° to 104°F （0° to 40°C）, <75% RH
DIMENSIONS（HxD）	7.5 x 4.0 x 2.0"（191 x 102 x 51 mm）
WEIGHT	1 lb. （450g）