您好, 歡迎來到化工儀器網
7
冷卻液氯離子自動檢測儀紫外可見分光光度計
可供物理學、化學、醫學、生物學、藥物學、地質學等學科進行科學研究，是廣泛應用于化工、藥品、生化、冶金、輕工、材料、環保、醫學化驗等行業及分析行業中最重要的質量控制儀器之一，是常規實驗室常的儀器。
LOAD】數據調出鍵;
【SAVE】數據存儲鍵;
【SETλ】設置波長鍵;
【ZERO】調100%T/0Abs，和建用戶基線鍵;
【PRINT
產品簡介
詳細介紹
冷卻液氯離子自動檢測儀紫外可見分光光度計介紹：
所輸入的因子個數與所選擇的曲線擬合方法有關，下表是其對應關系：
曲線擬合方法 | 曲線方程表達式 | 所需輸入的因子數 |
一階線性過零擬合 | C=K1×A | K1, r* |
一階線性擬合 | C=K0+K1×A | K0,K1,r* |
二階擬合 | C=K0+K1×A+K2×A2 | K0,K1,K2 |
三階擬合 | C=K0+K1×A+K2×A2+K3×A3 | K0,K1,K2,K3 |
試驗前的準備
? 將試驗用比色皿或試管用蒸餾水或其他專門的清洗劑清洗干凈，并用柔軟的棉布或紙巾將其表面的手指印或滴液擦試干凈；
? 將盛參比液的比色皿放入4聯手動樣品架（紫外可見分光光度計系列）或固定單個樣品架（對于雙光束紫外可見分光光度計）最靠近你的槽位中，再將推桿向前推到頭使比色皿正對光路，關上樣品室蓋；
Appendix B
Correction Methods
A number of correction techniques can be used to eliminate or reduce interference errors.In general,if the source of the error is known and is consistent from sample to sample.the error can be eliminated.On the other hand,if the source is unkown and varies from sample to sample,the error can be reduced but not eliminated.Correction techniques can always require data from at least two wavelengths. The more sophisticated correction techniques require multiwavelenghth or spectral data.
A.1 Isoabsorbance
When a known interfering component with a known spectrum is present,the error introduced by this component at the analytical wavelength for the target analyte can be eliminated by selecting a reference wavelength at which the interfering compound exhibits the same absorbance as it does at the analytical wavelength.The absorbance at this reference wavelength is subtracted from the absorbance at the analytical wavelength,as shown in Figure A1.The residual absorbance is the ture absorbance of the analyte.
This technique is less reliable when the spectra of the analyte and of the interferent are highly similar.Moreover,it can correct for only one interference
如需了解冷卻液氯離子自動檢測儀紫外可見分光光度計更多信息，歡迎來咨詢！
上海析譜儀器有限公司是專業從事實驗室科學儀器自主研發、生產、銷售和服務一體的技術企業。公司坐落于上海市松江區久富經濟開發區。公司成立于2012年，公司主營實驗室常用儀器，光譜分析儀器-紫外可見分光光度計、可見分光光度計、雙光束紫外可見分光光度計、火焰光度計、薄膜固體測試儀、氮吹儀、固相萃取、索氏提取器，酸度計、天平、實驗室耗材、配件、配套標準試劑盒等。