技術文章
Burkert插入式渦輪流量傳感器8020型00419587技術參數
閱讀:1463 發布時間:2020-12-22Burkert傳感器Burkert插入式渦輪流量傳感器8020型00419587技術參數
插件 - 適合持續測量的Burkert葉輪流量傳感器
類型 8020 / 商品編號 419587
德國寶德Burkert插入式渦輪流量傳感器貨號 419587
類型 8020
Flow rate | 12,0 V - 36 V | -15,00 °C - 80,00 °C | Paddle wheel | Magnetic | Transistor | FKM (fluororubber) | PVDF (Polyvinylidene fluoride) | FKM (Fluor rubber) | PVDF (Polyvinylidene fluoride)
Burkert插入式渦輪流量傳感器特點:
-經濟地集成到管道系統中,不需額外的管道
-三線,頻率脈沖結構,適合直接連接在 PLC(PNP 和 NPN)上
-可簡便地連接到分離式 Bürkert 分析儀上
商品描述
帶渦輪的Burkert流量計適用于低固體含量的中性和弱腐蝕性液體。由 Bürkert設計的管件系統保證了可方便地將設備安裝入 DN20 至 DN400 的管道中。Burkert流量計會生成與流速成比例的脈沖頻率信號,并可由 Bürkert 發送器/控制器進行處理。
Burkert插入式渦輪流量傳感器8020型00419587技術屬性
Type 8020
Product sub-group Flow rate
Flow rate (volume) Yes
Concentration 1 No
Continuous measurement Yes
Dosing No
Switch No
Construction device Compact
Display type no display
Protection class measurement device (IP) IP65
DC voltage min. 12 V
DC voltage max. 36 V
Battery voltage No
Precision of volume flow rate in relation to reading 1 %
Temperature environment min -15 °C
Temperature environment max 60 °C
Temperature medium min -15 °C
Temperature medium max 80 °C
Nominal pressure (DIN EN 1333) PN 10
Dynamic viscosity min. 0 cP
Dynamic viscosity max. 300 cP
Detection of flow direction No
Sensor type Paddle wheel
Paddle wheel type Magnetic
Paddle wheel measuring principle detection Hall
Fitting electronic interface Insertion 2 (inch)
Cable plug in delivery enclosed
Cable plug art. no. - type 00438811 - 2508
Electrical connection 1 type Plug pattern form A according to DIN EN 175301-803
Electrical connection 1 quantity 1 PCE
Electrical connection 1 number of contacts 4 PCE
Output 1 digital type Transistor
Output 1 digital version NC No
Output 1 digital version NO No
Output 1 digital transistor connection NPN Yes
Output 1 digital transistor connection PNP No
Digital output 1 transistor contactless 0,1 A
Output 2 digital type Transistor
Output 2 digital version NC No
Output 2 digital version NO No
Output 2 digital transistor connection NPN No
Output 2 digital transistor connection PNP Yes
Digital output 2 transistor contactless 0,1 A
Electronics body material category Plastics
Electronics body material PEHD
Nut material PC (polycarbonate)
Sensor/housing seal material FKM (fluororubber)
Attachment part material PSU (polysulfone)/PPSU (polyphenylsulfone)
Electronics body encapsulated Resin
Parametrisation local No
Parametrisation separate No
Parametrisation fixed Yes
sensor holder material composition Plastics
Sensor holder material PVDF (Polyvinylidene fluoride)
Medium-contacting parts seal material FKM (Fluor rubber)
Paddle wheel material PVDF (Polyvinylidene fluoride)
Paddle wheel axle material Ceramic
Bearing material category Technical ceramics
Bearing material Ceramic
Insertion sensor length short
重量 0,5 kg