適用于連接
2個溫度火災探測器和2個UV火焰探測器

功能：
-電源
監視和警報-UV火焰探測器FL / SS 7510/35 MIL的
監視和警報-溫度監視器KPS 79的監視和警報
-紫外線評估火焰探測器和溫度監控器
-滅火系統的本地手動和自動釋放
- 滅火系統的 故障和釋放顯示電阻加熱器Art.No:Z105.056 AUMA 電機

輸出：
-BMZ，UV火焰探測器和溫度傳感器的一般
故障-主電流錯誤
-滅火啟動和釋放
-滅火閥打開/關閉

用于安裝Stepless®薄型夾鉗的鉗頭–

產品組168

可選的壓緊彈簧可改善操作性，尤其適用于

生產線應用。 可用于標準夾

從40毫（對于特殊類型約為19.5毫）。 可以使用

適用于7、9 mm和10 mm寬的夾具。 與鉗子兼容

類型HO 3000和HO 4000。

Special Pincer Heads for Oetiker ME/EL

– Installation of Oetiker Stepless® Low Profile Clamps

All Oetiker Stepless® Low Profile Clamps have unique head

requirements and are specific to the product group designation

and type.

When using Oetiker ME pneumatic pincers, it is essential to use

a throttle valve for adjusting the closing speed.

Oetiker recommends the use of appropriate calibration equipment

and techniques to ensure that the closing force is achieved.

When used in conjunction with the HO EL body assembly, the

force and closed gap can be controlled and monitored.

Pincer heads

Jaw width (mm)

9.0

Pincer types

HO ME Pincer head complete

13900257

Replacement-jaw kit

13900295

Spring accessory

13900302

Calibration adaptor

13900862

Throttle valve with plug DN6

13900636

Throttle valve with adaptor for NPT 1

13900637

HO EL Pincer head complete

13900634

Replacement-jaw kit

13900295

Spring accessory

13900302

Calibration adaptor

13900862

Pincer heads for installing reusable Stepless® Low Profile

Clamps – Product Group 168 (RWV)

The hold-down springs fitted to both jaws make closure easier

and improve handling. Compatible with pincer types HO 2000

to HO 4000.

90

Pincer heads

Standard Special*

Jaw width (mm)

7.7

7.7

Pincer types

HO ME Pincer head complete

13900664 13900666

Replacement-jaw kit

13900673 13900673

Spring accessory電阻加熱器Art.No:Z105.056 AUMA 電機

13900675 13900676

Calibration adaptor

13900862 13900862

Throttle valve with plug DN6

13900636 13900636

Throttle valve with adaptor for NPT 1 13900637 13900637

HO EL Pincer head complete

13900663 13900665

Replacement-jaw kit

13900673 13900673

Spring accessory

13900675 13900676

Calibration adaptor

13900862 13900862

* Low-profile clamp with single closure hook – only for 7 mm

band width. Especially suitable for small low-profile clamps

Pincer heads for installing Stepless® Low Profile Clamps –

Product Group 168

The optional hold-down springs improve handling, especially for

production-line applications. Can be used for standard clamps

from 40 mm (or approx. 19.5 mm for special types). Can be used

for clamps 7, 9 mm and 10 mm wide. Compatible with pincer

types HO 3000 and HO 4000.

83.1

Pincer heads

RT 8

Jaw width (mm)

7.7

Pincer types

HO ME Pincer head complete

13900670

Replacement-jaw kit

13900673

Calibration adaptor

13900862

HO EL Pincer head complete

13900669

Replacement-jaw kit

13900673

Calibration adaptor

13900862