德國BURKERT溫度開關 技術參數
General data Materials Housing Front panel folio / Screws Cable plug, Multipin Wall-mounted holder Materials wetted parts Sensor element Seal
PC, +20% glass fibre Polyester / Stainless steel PA PVC
可以在顯示屏上直接設定開關點，也可以通過外部PLC的4...20 mA信號輸入來編程控制。
with the 3 key pads or optionally, with input 4...20 mA, from an external PLC over a 4...20 mA loop. As an option,
the process value can additionally be transmitted to the PLC (4...20 mA).
The connection of the 8400 to the process in the piping is made using standard fittings.
在臺儀器中進行測量值顯示、監控、傳輸及 On/Off 調節
除此之外，4...20 mA信號過程值可以傳送PLC。
Complete device data (pipe + electronic module) Pipe diameter Any pipe with sensor connection 1/2" Measuring range Compact version
Wall-mounted version
外部設定值，閉環控制回路
  Indication, monitoring, transmitting and On/Off control in one device
 •  Extra-large display •  Menu-guided parametrisation
-40...+125°C (-40...+257°F) (with ambient temperature between 0 and +40°C (-32 and 104°F)) -40...+90°C
大尺寸數字指示器
Stainless steel FKM Sensor element Pt100 Screw-in thread G, NPT, Rc 1/2" Electrical connections

德國BURKERT溫度開關 技術參數
這款智能傳感器/開關配置有超大顯示屏用于監測極限值或者控制開關或連續回路。
•  Complete control loop with external setpoint
This inligent sensor/switch with an extralarge display is specifically designed to switch a valve and to establish
 a monitoring system or an ON/OFF control loop. Compact and wall versions are available.
墻裝式需要安裝到墻上的支架中，并與個遠程溫度傳感器配合使用。
The wall-mounted version must be inserted into a holder previously mounted on a wall,
兩種規格可供選擇：8400緊湊型和8400墻裝式。
Cable plug: EN 175301-803 Multipin: swivel M12, 5-pin or M12, 4-pin or 8-pin Voltage supply cable max.
 100 m, shielded, 0.14...0.5 mm2 max. 5 ? max. cable impedance (Wall-mounted version)
(-40...+194°F) (with ambient temperature above +40°C(104°F)) -40...+125°C (-40...+257°F)
 Medium temperature +125°C max. (257°F) Fluid pressure max. PN16 Switching accuracy ±0.5°C (0.9°F) (0...+80°C
 (+32...+176°F)) ±1.5°C (2.7°F) (outside of 0...+80°C (+32...+176°F)) Repeatability ? ±0.4%
通過菜單進行參數化
8400型可通過G1/2標準T型管接件連接管路。
and it must be associated with a remote temperature sensor. The switching points can be programmed